Diesel Fuel Supply for Ready-Mix Concrete and Asphalt Plants in Dubai: Requirements, Permits, and Ordering Guide
Key Highlights
- Licensed SCE suppliers only—buying diesel from unlicensed sources risks fines of AED 25,000 or more under Resolution 85 of 2025.
- 10 PPM ultra-low-sulfur diesel (EN 590) is the confirmed product for concrete and asphalt plant equipment.
- Minimum order is 13,000 Imperial Gallons (approx. 59,099 liters) with upfront, cash on delivery, or bank transfer before offloading.
- Every delivery includes a Certificate of Analysis and delivery notes across all seven Emirates of the UAE.
If your ready-mix concrete or asphalt plant runs on diesel, you cannot buy fuel from just anyone. Dubai law is clear.
Under Federal Law No. 14 of 2017 and Executive Council Resolution No. 85 of 2025, only licensed suppliers with valid SCE permits may deal in petroleum products in the Emirate.
Construction plants buying diesel for generators, batching equipment, or asphalt burners must source from an SCE-approved supplier. Buying from an unlicensed source exposes the plant to fines of AED 25,000 or more.
Keep reading the article to learn more.
Do ready-mix concrete and asphalt plants in Dubai need to buy diesel from a licensed supplier?
Yes. Federal Law No. 14 of 2017 prohibits any person from trading petroleum products without authorization.
Executive Council Resolution No. 85 of 2025 reinforces this: Article 6 states that no person may deal in petroleum products in Dubai unless the source is identified, proof is provided that products were obtained from a company approved by the SCE, and the products meet the conditions set out in the Law and this Resolution.
The Dubai Supreme Council of Energy is the competent authority responsible for regulating petroleum products trading in Dubai, issuing permits, and monitoring compliance.
Before you place an order, follow these steps:
- Confirm that your plant’s diesel use for generators, batching equipment, or asphalt burners falls under dealing in petroleum products.
- Verify that your supplier holds a valid SCE permit and sources product from an SCE-approved company.
- Reject any offer from an unlicensed or unknown-source supplier.
What diesel specification should ready-mix concrete and asphalt plants use?
The only confirmed product for industrial and construction-site use is 10 PPM ultra-low-sulphur diesel (EN 590). This fuel is suitable for modern diesel engines, generators, and industrial equipment. It has a sulfur content of 10 parts per million or less.
UAE.S 477:2021, the UAE standard for diesel (gas oil) fuel, sets requirements and test methods for diesel with sulfur at 10 ppm or less, aligned with international specifications.
A Certificate of Analysis is available on request for supported product batches, listing measured values for sulfur and other quality parameters.
If your plant has recurring high-volume requirements, bulk supply planning helps you schedule deliveries around production cycles so operations never stall.
Which SCE permits are required for diesel supply to construction and industrial sites in Dubai?
The SCE issues permits for the import, distribution, transport, sale and purchase, and storage of diesel. Permits are valid for one year and renewable for the same period.
An application for renewal must be submitted at least thirty days prior to expiry. Fees are set out in Schedule (1) of Resolution 85 of 2025:
| Permit activity | Indicative fee (AED) |
| Import of diesel | 10,000 |
| Export or re-export of diesel | 2,000 |
| Distribution, transport, storage, or sale of diesel | 2,000 per activity |
| Retail sale and delivery by mobile vehicles | 7,000 |
| Fuel pumps within an industrial establishment | 8,000 |
Buyers should confirm their supplier holds valid permits before placing an order. This protects your plant from fines and keeps your supply chain compliant.
How is diesel delivered to ready-mix concrete and asphalt plants in Dubai?
OJAS coordinates supply from approved sources through qualified delivery partners.
Every delivery comes with documentation, including a Certificate of Analysis and delivery notes. The process covers all seven Emirates of the UAE, so your plant in Dubai receives fuel on schedule.
The ordering workflow follows six clear stages:
- Requirement capture: volume, product, location, timing, and commercial terms.
- Source alignment: availability, supplier qualification, and product specification.
- Commercial offer: a market-linked quotation with payment and execution terms.
- Supply coordination: scheduling with approved delivery partners.
- Documentation: Certificate of Analysis, delivery notes, invoice, and related trade documents.
- Support and review: communication, issue resolution, and recurring supply planning.
What is the minimum order quantity and how is payment handled for Ojas?
The minimum order quantity is 13,000 Imperial Gallons per order, which equals approximately 59,099 liters. This applies across all confirmed products and services. Payment terms are upfront, cash on delivery, or bank transfer before offloading.
Product availability, pricing, and delivery lead time remain subject to market conditions, product source, destination, and commercial terms agreed at the order stage.
What happens if a plant buys diesel from an unlicensed supplier in Dubai?
The penalties are significant. Under Resolution 85 of 2025, Schedule (2), selling, purchasing, transporting, distributing, or filling diesel within the Emirate without obtaining a Permit carries a fine of AED 25,000.
Acquiring diesel from unknown sources or from sources not authorized by the SCE also carries a fine of AED 25,000. Dealing in diesel that does not conform to the technical standards approved by the SCE carries a fine of AED 50,000.
Upon repetition of the same violation within one year, the fine is doubled, up to a maximum of AED 1,000,000.
In addition to the fine, the SCE may revoke the Permit, temporarily close the Establishment for no more than six months, revoke the commercial license, seize, destroy, or re-export non-conforming petroleum products, and impound violating vehicles.
How do you order diesel for your concrete or asphalt plant from OJAS?
Start by contacting OJAS with your volume, product, location, and timing requirements.
OJAS aligns supply sources, issues a market-linked quotation, and coordinates delivery with approved partners. You receive a Certificate of Analysis, delivery notes, and an invoice with every supported batch.
The process works like this:
- Submit your inquiry with volume, product (10 PPM EN 590), site location, and delivery timing.
- Receive a market-linked quotation with payment and execution terms.
- Confirm your order with a minimum of 13,000 Imperial Gallons.
- OJAS schedules delivery with qualified delivery partners to your plant site.
- You receive documentation, including the Certificate of Analysis, delivery notes, and invoice.
FAQs
1. Can ready-mix concrete plants buy diesel directly from any supplier?
No. Dubai law requires petroleum products to be sourced from an SCE-approved supplier holding a valid permit. Buying from an unlicensed source can result in fines of AED 25,000 or more under Executive Council Resolution No. 85 of 2025.
2. What is the minimum order quantity for diesel supply in Dubai for Ojas?
The minimum order quantity is 13,000 Imperial Gallons per order, equal to approximately 59,099 liters, across all confirmed OJAS products and services.
3. What payment terms does OJAS accept?
Upfront, cash on delivery, or bank transfer before offloading.
4. Is 10 PPM EN 590 diesel suitable for asphalt plant burners?
Yes. It is suitable for modern diesel engines, generators, and industrial equipment that require cleaner combustion and consistent performance.
5. Does OJAS deliver diesel across all of Dubai?
Yes. OJAS coordinates UAE domestic supply across all seven Emirates, including Dubai construction and industrial sites, through qualified delivery partners.
6. Can OJAS export diesel from Jebel Ali or Fujairah?
Yes. Jebel Ali Port and Fujairah Port are the confirmed international trade gateways for export.
7. What documentation comes with a diesel delivery?
A Certificate of Analysis, delivery notes, invoice, and related trade documents are provided with every supported batch.
8. How long is an SCE diesel permit valid?
One year, renewable for the same period. Renewal applications must be submitted at least thirty days before expiry.
9. What if diesel is delivered to the wrong site or the quantity is short?
OJAS handles issue resolution, quantity reconciliation, and recurring supply planning through its support and review process.
10. Does OJAS supply Marine Diesel Oil to concrete plants?
No. Marine Diesel Oil is for marine engines and port-side operations only. Concrete and asphalt plant equipment uses 10 PPM EN 590 diesel.
Get your plant powered with a compliant diesel supply
Ready-mix concrete and asphalt plants in Dubai need fuel they can trust; from suppliers they can verify.
OJAS coordinates the supply of 10 PPM Ultra-Low-Sulphur Diesel (EN 590) through approved sources and qualified delivery partners.
Product availability, pricing, and delivery lead time remain subject to market conditions, product source, destination, and commercial terms agreed at the order stage.